HP HPE6-A85 BEST PRACTICE | HPE6-A85 VALID DUMPS DEMO

HP HPE6-A85 Best Practice | HPE6-A85 Valid Dumps Demo

HP HPE6-A85 Best Practice | HPE6-A85 Valid Dumps Demo

Blog Article

Tags: HPE6-A85 Best Practice, HPE6-A85 Valid Dumps Demo, Latest HPE6-A85 Test Sample, 100% HPE6-A85 Correct Answers, Test HPE6-A85 Pattern

A considerable amount of effort goes into our products. So in most cases our HPE6-A85 study materials are truly your best friend. On one hand, our HPE6-A85 study materials are the combination of the latest knowledge and the newest technology, which could constantly inspire your interest of study. On the other hand, our HPE6-A85 Study Materials can predicate the exam correctly. Therefore you can handle the questions in the real exam like a cork. Through highly effective learning method and easily understanding explanation, you will pass the HPE6-A85 exam with no difficulty.

HP HPE6-A85 Certification Exam is intended for individuals who have a basic understanding of networking concepts and a working knowledge of wireless LAN technologies. Candidates who are planning to take HPE6-A85 exam should have experience with Aruba products and solutions, including ArubaOS, Aruba mobility controllers, and Aruba access points. They should also be familiar with network security concepts, such as wireless security protocols, authentication, and access control.

>> HP HPE6-A85 Best Practice <<

HP HPE6-A85 Exam | HPE6-A85 Best Practice - Full Refund if Failing HPE6-A85: Aruba Campus Access Associate Exam Exam

HP HPE6-A85 study materials will be very useful for all people to improve their learning efficiency. If you do all things with efficient, you will have a promotion easily. If you want to spend less time on preparing for your HPE6-A85 Exam, if you want to pass your HPE6-A85 exam and get the certification in a short time, our Aruba Campus Access Associate Exam HPE6-A85 study materials will be your best choice to help you achieve your dream.

HP Aruba Campus Access Associate Exam Sample Questions (Q89-Q94):

NEW QUESTION # 89
You are working with a pair of 6300M switches in a VSF stack. The switch has 48 SmartRate 5G ports, 2 SFP28 ports, and 2 SFP56 ports. Both SFP56 ports are used for stacking.
You need to provide an LACP connection to another identical stack with the maximum available bandwidth possible.
What should you configure?

  • A. a 16-member LAG using 2 SFP28 ports and 6 SR5 ports on each switch
  • B. a four-member LAG using 2 SFP28 ports on each switch
  • C. an eight-member LAG using 4 SR5 ports on each switch
  • D. an eight-member LAG using 2 SFP28 ports and 2 SR5 ports on each switch

Answer: A

Explanation:
To provide an LACP connection with the maximum available bandwidth, one should configure a link aggregation group (LAG) using all available ports that can be used for data transfer. Since the SFP56 ports are used for stacking, the next best option is to use the 2 SFP28 ports and as many SmartRate 5G (SR5) ports as possible on each switch, which would allow for a 16-member LAG, with 2 SFP28 and 6 SR5 ports on each switch contributing to the LAG.


NEW QUESTION # 90
List the WPA 4-Way Handshake functions in the correct order.

Answer:

Explanation:

Explanation:
The WPA 4-Way Handshake functions in the correct order are as follows:
Exchanges messages for generating PTK
Proves knowledge of the PMK
Distributes an encrypted GTK to the client
Sets first initialization vector (IV)
The process is designed to confirm that both the client and the access point have the correct credentials (such as the PMK), to establish the temporal keys used to encrypt and decrypt data, and to confirm that the client is actually alive and present at the time of the handshake.


NEW QUESTION # 91
You need to drop excessive broadcast traffic on ingress to an ArubaOS-CX switch What is the best technology to use for this task?

  • A. QoS shaping
  • B. Strict queuing
  • C. DWRR queuing
  • D. Rate limiting

Answer: D

Explanation:
The best technology to use for dropping excessive broadcast traffic on ingress to an ArubaOS-CX switch is rate limiting. Rate limiting is a feature that allows network administrators to control the amount of traffic that enters or leaves a port or a VLAN on a switch by setting bandwidth thresholds or limits. Rate limiting can be used to prevent network congestion, improve network performance, enforce service level agreements (SLAs), or mitigate denial-of-service (DoS) attacks. Rate limiting can be applied to broadcast traffic on ingress to an ArubaOS-CX switch by using the storm-control command in interface configuration mode. This command allows network administrators to specify the percentage of bandwidth or packets per second that can be used by broadcast traffic on an ingress port. If the broadcast traffic exceeds the specified threshold, the switch will drop the excess packets.
The other options are not technologies for dropping excessive broadcast traffic on ingress because:
* DWRR queuing: DWRR stands for Deficit Weighted Round Robin, which is a queuing algorithm that assigns different weights or priorities to different traffic classes or queues on an egress port. DWRR ensures that each queue gets its fair share of bandwidth based on its weight while avoiding starvation of lower priority queues. DWRR does not drop excessive broadcast traffic on ingress, but rather schedules outgoing traffic on egress.
* QoS shaping: QoS stands for Quality of Service, which is a set of techniques that manage network resources and provide different levels of service to different types of traffic based on their requirements.
QoS shaping is a technique that delays or buffers outgoing traffic on an egress port to match the available bandwidth or rate limit. QoS shaping does not drop excessive broadcast traffic on ingress, but rather smooths outgoing traffic on egress.
* Strict queuing: Strict queuing is another queuing algorithm that assigns different priorities to different traffic classes or queues on an egress port. Strict queuing ensures that higher priority queues are always served before lower priority queues regardless of their bandwidth requirements or weights. Strict queuing does not drop excessive broadcast traffic on ingress, but rather schedules outgoing traffic on egress.
References: https://en.wikipedia.org/wiki/Rate_limiting https://www.arubanetworks.com/techdocs/AOS- CX_10_08/NOSCG/Content/cx-noscg/qos/storm-control.htm https://www.arubanetworks.com/techdocs/AOS- CX_10_08/NOSCG/Content/cx-noscg/qos/dwrr.htm https://www.arubanetworks.com/techdocs/AOS- CX_10_08/NOSCG/Content/cx-noscg/qos/shaping.htm https://www.arubanetworks.com/techdocs/AOS- CX_10_08/NOSCG/Content/cx-noscg/qos/strict.htm


NEW QUESTION # 92
The customer requires two Aruba CX 6200F 48G switches to be connected to each other with a distance of 80m/252ft between wiring closets. Switches need to have reservation for VSF expansion with ring topology in each cabinet.
What is a valid configuration for a redundant link-aggregation port configuration?

  • A. Ports 1/1/1 and 1/1/2 for LAG
  • B. Ports 1/1/51 and 1/1/52 with SFP+ for LAG
  • C. Ports 1/1/47 and 1/1/48 for LAG
  • D. Ports 1/1/49 and 1/1/50 with SFP28 for LAG

Answer: D

Explanation:
For an 80m distance between wiring closets, using SFP+ transceivers is appropriate as they can support longer distances than standard copper interfaces. Ports 1/1/51 and 1/1/52 are typically reserved for uplinks on Aruba CX 6200F 48G switches and can support SFP+ transceivers, making them suitable for a redundant link-aggregation port configuration.


NEW QUESTION # 93
What is the recommended UXI monitoring solution in large logistic facilities?

  • A. Add a UXI sensor in every aisle of the logistic space.
  • B. Use the UXI App direct on Zebra scanning devices running on Android.
  • C. Use a special ruggedized UXI sensor.
  • D. Use the UXI App on all handheld devices running on Windows CE.

Answer: A

Explanation:
In large logistic facilities, to ensure comprehensive monitoring and performance analysis, it's recommended to place a User Experience Insight (UXI) sensor in every aisle. This allows for detailed and specific monitoring of network performance across the extensive coverage area of such facilities.


NEW QUESTION # 94
......

We offer you free demo to you to have a try before buying HPE6-A85 study guide, therefore you can have a better understanding of what you are going to buy. Free demo can be find in our website, if you are quite satisfied with the free demo, just add the HPE6-A85 study guide to shopping cart, after you buy it, our system will send the downloading link and password to you within ten minutes, and you can start your learning right now. Moreover, we offer you free update for one year after you buy the HPE6-A85 Exam Dumps, therefore you can get the latest version timely.

HPE6-A85 Valid Dumps Demo: https://www.testkingpass.com/HPE6-A85-testking-dumps.html

Report this page